Please provide the model number of the Immulite
Purchase of a cable that will connect Immulite to a workstation near the Immunoassay (we have found the cable below to work well) You will need to confirm that there is a serial connection on the PC. If not, the USB version will need to be purchased (see second link) - StarTech-com-RS232-Serial-Modem-Cable; Startech-1-Port-Modem-Serial-Adapter
Install IDEAS on the workstation connected to the Immulite
Advise Mellowood of the tests run on the machine and the associated Immulite test codes for setup in IDEAS
Configuration of the Immulite itself to enable export - usually handled by the clinic IT specialist on the phone with Siemens support
Installation of a printer for Blood Labels (we recommend Dymo LabelWriter 450 using #30336 labels -Small Multipurpose Labels, 1" x 2 1/8" or 25 mm x 54 mm or #30252 -Address Labels, 1 1/8 " x 3.5" or 32 mm x 89 mm).

Browser not supported