Please provide the model number of the Access 2
Purchase of a cable that will connect Access 2 to a workstation near the Immunoassay (we have found the cable below to work well) You will need to confirm that there is a serial connection on the PC. If not, the USB version will need to be purchased (see second link) - StarTech-com-RS232-Serial-Modem-Cable; Startech-1-Port-Modem-Serial-Adapter
Install IDEAS on the workstation connected to the Access 2
Advise Mellowood of the tests run on the machine and the associated Access 2 test codes for setup in IDEAS
Configuration of the Access 2 itself to enable export - usually handled by the clinic IT specialist on the phone with Siemens support
Installation of a printer for Blood Labels (we recommend Dymo LabelWriter 450 using #30336 labels -Small Multipurpose Labels, 1" x 2 1/8" or 25 mm x 54 mm or #30252 -Address Labels, 1 1/8 " x 3.5" or 32 mm x 89 mm).

Browser not supported